How to get to The Carpenter Hotel from Austin-Bergstrom (AUS) and other airports

From Austin-Bergstrom International Airport (AUS) take a 15–30 minute rideshare or taxi directly to 400 Josephine St, Austin, TX 78704. Alternately use CapMetro public transit (bus + rail combination) or pick up a rental car at AUS; San Antonio and Killeen airports are farther options if you’re driving in.
In this guide
- From Austin-Bergstrom International Airport (AUS)
- Public transit from the airport
- Driving to The Carpenter Hotel and parking
- Arriving from San Antonio or Killeen/Fort Hood airports
- Getting around once you’re at The Carpenter Hotel
- Arrival tips and hotel check-in essentials
- Rooms and on-site dining to note on arrival
From Austin-Bergstrom International Airport (AUS)
Rideshare and taxis are the simplest direct options. Rideshare pickup at AUS is on Level G of the Rental Car Area parking garage; travel time to The Carpenter Hotel typically runs about 15–30 minutes depending on traffic.
If you prefer a car, rental counters are at the airport and driving directions use the airport exit toward downtown, then head west toward South Congress and Josephine Street.
- Rideshare/taxi: direct to 400 Josephine St (fastest door-to-door option)
- Rental car: available at AUS; hotel offers covered and uncovered self-parking on site for a surcharge (reservations for parking are not possible)
- Travel time: roughly 15–30 minutes depending on traffic
| Option | Where to catch it | Notes |
|---|---|---|
| Rideshare / Taxi | Level G, Rental Car Area garage | Direct, typical fare to downtown varies by time |
| Rental Car | Airport rental center | Hotel parking available for a surcharge; height restrictions may apply |
| Shuttle / Private transfer | Pre-book online | Door-to-door but needs advance reservation |

Public transit from the airport
You can reach The Carpenter Hotel from AUS using CapMetro buses and trains, but expect at least one transfer and longer travel time than a rideshare. CapMetro local buses are inexpensive and the MetroRail Red Line serves downtown connections.
Most public-transit routes will bring you toward downtown or South Congress where a short bus ride, walk, or local transfer will get you to Josephine Street near Zilker.
- CapMetro fares: local bus ~$1.25, MetroRail Red Line ~$3.50 (confirm current fares on CapMetro)
- Plan your trip on CapMetro.org or a transit app—check schedules for service times and transfer points
- Allow 45–75 minutes total travel time from the airport depending on connections
| Leg | Typical route |
|---|---|
| AUS to downtown | Airport bus or shuttle to MetroRail/central bus hub |
| Downtown to South Congress / Zilker | Local bus or short rideshare from transit stop to 400 Josephine St |
| Final approach | Walk from nearby stops (hotel is a short walk from the Butler Hike-and-Bike Trail and local stops) |
Driving to The Carpenter Hotel and parking
The hotel address is 400 Josephine St, Austin, TX 78704 (Zilker / South Austin). Use South Congress Avenue or Barton Springs Road to approach Josephine Street depending on where you’re coming from.
The Carpenter Hotel offers covered and uncovered self-parking on site for a surcharge; parking spaces are limited and cannot be reserved in advance. The property has accessible parking spaces and an elevator for guest access.
- Address for GPS: 400 Josephine St, Austin, TX 78704
- On-site self-parking: covered and uncovered for a surcharge (limited spaces)
- If you plan to drive during events (ACL festival, weekends), expect local traffic and limited parking—arrive early when possible
| Tip | Why it matters |
|---|---|
| Use Josephine or South Congress as approach | Easier access to the hotel entrance and local streets |
| Expect limited on-site spaces | May need to plan alternate parking or allow time to find a spot |
| Check height restrictions | Some covered parking areas have limits |

Arriving from San Antonio or Killeen/Fort Hood airports
San Antonio International and Killeen-Fort Hood Regional are viable if your travel plans include both cities, but expect a drive of roughly an hour or more. Driving from these airports to The Carpenter Hotel is straightforward via the interstate system.
If you fly into San Antonio (SAT) or Killeen (GRK), rent a car at the airport for the most convenient trip to the hotel; there are no direct shuttle services noted from these airports to The Carpenter Hotel in the dossier.
- San Antonio International (SAT): about 66 miles by car—plan ~1–1.5 hours depending on traffic
- Killeen-Fort Hood (GRK): about 55 miles by car—plan roughly an hour or more
- Renting a car at SAT or GRK is the easiest way to reach downtown Austin and the Zilker neighborhood
| Airport | Approx. distance (from dossier) | Best transport |
|---|---|---|
| San Antonio International (SAT) | About 66 miles | Rental car (driving) |
| Killeen–Fort Hood Regional (GRK) | About 55 miles | Rental car (driving) |
| Austin-Bergstrom (AUS) | About 11.4 miles | Rideshare/taxi or rental car |
Getting around once you’re at The Carpenter Hotel
The hotel sits in Zilker, within easy walking distance of Lady Bird Lake, the Butler Hike-and-Bike Trail, Zach Theatre, and many South Congress shops and restaurants. Downtown attractions like Sixth Street and the State Capitol are a short drive away.
CapMetro local buses serve the South Congress area and there’s a transit center nearby; Austin’s bikeshare and walking paths are good options for short trips along Lady Bird Lake.
- Walk to nearby spots: Lady Bird Lake (~0.3 mi), Zilker Park, and South Congress shops
- CapMetro local buses and MetroRapid routes serve South Congress and downtown—check schedules before you go
- Biking/walking: Butler Hike-and-Bike Trail is a block north of the hotel and provides scenic access toward downtown
| Destination | Approx. distance / time |
|---|---|
| Lady Bird Lake / Butler Trail | About 0.3 miles / a short walk |
| Barton Springs Pool | About 1.1 miles / roughly a 20-minute walk |
| South Congress Avenue | About 0.9 miles / short walk or bike |

Arrival tips and hotel check-in essentials
Check-in at The Carpenter Hotel begins at 4 PM (some property materials list 3 PM as an alternate time); check-out is at 12 PM (noon). Early check-in may be accommodated when available but could incur a fee—confirm directly with the hotel.
The reservation holder must be 21 years of age or older and present a valid government-issued photo ID at check-in. The hotel accepts card payments and may place an incidental hold at check-in per property policy.
- Confirm check-in time with the hotel prior to arrival (4 PM per the Hyatt-hosted FAQ; alternate listings show 3 PM)
- Reservation holder must be 21+ and have a valid ID at check-in
- If you need parking, note on-site parking is available for a surcharge and spaces are limited
| Need | What to bring / do |
|---|---|
| ID and card | Government ID and payment card for incidentals |
| Parking | Plan for a surcharge and limited spaces |
| Pool access | Pool access is included with the resort fee; pool hours are 8 AM–8 PM |
Rooms and on-site dining to note on arrival
The Carpenter Hotel offers two room types listed as Room and Deluxe Room. If you booked a specific room type, confirm your bedding preference (Room can be configured with 1 King Bed, 2 Double Beds, or 1 Queen Bed; Deluxe Room lists 1 King Bed).
On-site dining includes Carpenters Hall (open for lunch, dinner and weekend brunch) and Carpenter Coffee Bar (daily coffee and kolaches). Carpenters Hall accepts walk-ins but is also bookable on OpenTable.
- Room — available with 1 King Bed, 2 Double Beds, or 1 Queen Bed
- Deluxe Room — available with 1 King Bed
- Carpenters Hall: lunch, dinner, weekend brunch; Carpenter Coffee Bar: daily from 7:00 AM–5:00 PM
| On-site venue | When it serves |
|---|---|
| Carpenters Hall | Lunch, dinner, weekend brunch (see hotel dining hours) |
| Carpenter Coffee Bar | Daily 7:00 AM–5:00 PM |


